Payment & Shipping Terms:
|Product Name:||Fiber Laser Cutting Machine||Effective Cutting Size:||1500*3000mm (1300*2500mm Optional )|
|Real Laser Power:||1500W||Laser Wavelength:||1064nm|
|Laser Type:||Fiber Laser||Power Consumption:||15KW|
|Focus System:||Automatic Following And Detective||Power Supply:||Three Phase 380V/50Hz|
|Processing Material:||Stainless Steel, Carbon Steel, Aluminum, Etc||Machine Size:||9100*3600*1750mm ( L*W*H)|
|Working Table:||Double Exchange Tables||Machine Structure:||Full Sealed Cabinet With Laser Protection|
fiber laser cutting equipment,
fiber optic laser cutting system
Sheet Metal Cutting Fiber Laser Cutting Machine With Laser Power 1500W
The advantage of our 1500W fiber laser cutting machine ( double exchange table)
1.1. The cutting quality is good:
Because of the small laser spot, high energy density, fast cutting speed, laser cutting can therefore get better cutting quality.
(1) Cutting knife is narrow and parallel on both sides, also perpendicular to surface, dimensional accuracy of cutting pieces can be up to + / - 0.05 mm.
(2) Cutting surface is smooth and beautiful, the surface roughness is only a few dozen microns, laser cutting can be used as the final working procedure, parts can be even used directly without mechanical processing.
(3) Heat affected zone is very small, material performance is hardly affected near the kerf width , and the workpiece deformation is small. Also, kerf geometry is good , slitting rectangular cross-section shapes appear to be regular.
1.2. Highly automation:
Adopts digital control, you only need to use CAD to draw the picture and import to specialized software, laser cutting machine can cut out the artifacts you need, moreover there is intelligent typesetting function, thus can save raw material costs to the greatest extent.
1.3. High cutting efficiency:
Due to the transmission properties of laser, laser cutting machine has equipped with many sets of CNC work bench to realize numerical control. You only need to change the CNC program to cut different shape, as well as for two-dimensional cutting, and three-dimensional cutting.
1.4. Fast cutting speed:
The cutting speed can be up to 600 cm/min when using 1500W laser to cut 2mm low carbon steel plate, and can up to 120 m/min when cutting 5mm polypropylene resin plate. Material does not need clamping fixed for cutting, thus can save the jig and auxiliary time for material upload and download.
1.5. Non-contact cutting:
There is no contact for work piece and laser head, so there is no tool wear. No need to change "tool" for different shapes parts processing, only need to change the output parameters. Laser, low noise, small vibration, and no pollution while cutting.
1.6. Variety cutting material:
Compared with oxyacetylene cutting and plasma cutting, laser can cut many kinds of materials, including metal, nonmetal, metal and nonmetal based composite material, leather, wood, fiber, etc. But for different material, it shows different laser cutting adaptability due to its thermal physical properties and different laser absorption rate.
2.1. Excellent overall performance, changeable working tables, 7 seconds to finish high speed
changing, improve working efficiency of more than 48%.
2.2. The machine tool includes loading area and processing area, standard configuration is
changeable working tables, auto change the workpiece between processing area and loading
area by motor, convenient to upload and download. With the design of changeable working table,
could prepare the next uploading while processing, highly improved working efficiency.
2.3. Equipped with exhaust device, have good exhausting effect and little pollution.
2.4. Small occupied area, high system integration, convenient to operate and maintenance, 24 hours continuous working.
2.5. The water chiller has good safety protection function, such as over temperature, lack phase,
pressure, waterbreak, undervoltage, overload, etc. With stable performance, satisfied the cooling
requirement of laser source.
Machine Aplication scope:
Stainless steel, carbon steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized sheet and other metal pipes and tubes.
Machine Applicable Industry
It is widely applied in industrial pipeline processing, explosion-proof equipment, military industry, chemical industry, oil exploration, lamps and lanterns, metal processing, ironware, building, etc.
Machine main specifications:
|Laser source medium||Fiber laser|
|Cutting range(L*W)||3000mm × 1500mm||3000mm × 1500mm||3000mm × 1500mm|
|Z axle stroke||150 mm|
|Max cutting speed||40m/min||42m/min||45m/min|
|Max positioning speed||140m/min|
|Wok platform size/Max height of feeding material||4250x2500mm/more than 120mm|
|Cooling form||water cooling|
|Output power of laser source||1000W||1500W||2000W|
|Min. cutting gap||≤0.1mm||≤0.125mm||≤0.125mm|
|Positioning accuracy of X, Y and Z axles||±0.03 mm|
|Repeated positioning accuracy of X, Y and Z axles||±0.02 mm|
|Thickness of cutting material
(according to material)
|Drive model||Imported servo motor|
|Continuous working time||24 Hours|
|Machine weight||About 5950Kgs|
|Outer dimension||9028mm x 3741mm x 1910mm ( L*W*H)|
|Total protection level of power supply||IP54|
Competitive Advantage of Suntop Laser :
1, Our 1500W sheet metal fiber laser cutting machine the main optic parts are imported from Germany or USA
2, Our machine tools are processed by high temperature Aluminium casting and welded which almost no deformation after 3-5 years.
3, We main for exporting, we have our professional after sales service team.
4, We have our own core patent technology, so our machine with high quality cost performance.
5, We do after sale service for oversea market within 12 hours.
6, We provide the free future programe and software upgrade.
7, We can customized the machine as per customer's requirements, machine can achieve the automation.
The cutting samples photos as follows: